Switch to desktop version  
No. 6,Yingtong industrial road,Shalang Longping industrial area,West district,(528403)Zhongshan,Guangdong,China +86-13611967526 golta@centrifugal-fan.com

Side Channel Blowers

Side Channel/High pressure blowers

Blowers from Golta Industries.

Side channel blowers are known as Regenerative blowers, Ring blowers, Vortex blowers, Vacuum compressor and vacuum pumps. Previously, the pressure was approximately 70Kpa and the inlet flow was to 2000M3 / H, but now we have increased its pressure to 104Kpa and the inlet flow rate has increased to 2500M3 / H. Therefore, the up graded series are higher efficient and more reliable.

Features of side channel blowers: First of all, it has a suction function which we can use for air and gas. For example, we can use it for both suction and blowing; In addition, it operates with less oil or no oil, therefore the output air is clean; And its output pressure reaches 100Kpa; Besides, compared to other types of centrifugal blowers, it runs far quieter; Furthermore, it is maintenance-free; In the end, it has a long life, but easy to install and easy to use.

Principle of side channel blowers: Because the impeller of Side Channel Blower consists of dozens of blades, which is similar to the impeller of a large gas turbine; Since the air in the middle of the impeller blades is subjected to centrifugal force and moves toward the edge of the impeller, so, it enters the annular cavity of the pump body and starts from the starting point of the blade in the same manner. When the impeller, circulating, they generate circulating airflow, and then, that make the pump use at very high energy; As for Side Channel blower adopts special explosion-proof motor and the structure is small, light, low in noise, and has no water also no oil. Hence, it has more advantages than other blowers.  So, if need more information, please contact us or link to our catalog page.

OUR PRODUCTS